TMNR-ME Series

Measures torque from geostationary axis to high-speed spindle by double bearing adoption
Possible to use for testing and instrument control, not just torque measurement
Horsepower measurement for motors can be performed by installing a rotation detector

Resources
Specification Sheet	No.KT51750-2 (282KB)
Instruction manual (PDF)	No.KT60179-1 (199KB)

Specifications
Rated capacity	±500 N･m~±5 kN･m
Safe overload	120% R.C.
Ultimate overload	200% R.C.
Rated output	1.6 mV/V±0.32 mV/V
Accuracy	±0.2% R.O. (In case of combination with Minebea’s Transmitter CSA-561B) (Linearity, hysteresis and repeatability are included.)
Excitation, recommended	4 VAC
Insulation resistance	500 M-ohm or more (DC50 V) (between bridge and main body)
Temp. range, safe	0 ℃ ~ 90 ℃
Temp. effect on zero	0.1% R.O./10 ℃
Temp. effect on output	0.1% LOAD/10 ℃
Maximum rotation	TMNR-500NME~2KNME: 10,000 rpm TMNR-3KNME: 8,000 rpm TMNR-5KNME: 6,000 rpm (Max. rotation is 3,000 rpm for the grease lubrication)
Zero shift by rotation	0.2% R.O.
Temperature rise by rotation	40 ℃ or less at the maximum rotation (grease lubrication) Double bearing side 60 ℃, Single bearing side 40 ℃ or less at the maximum rotation (droping lubrication)
Cable	φ10, 4 -cores shielded cable (model : CAC-160-※M) with the connector at the both ends. (Cable is specified from 10 m, 20 m or 30 m)
Connector Part No.	TC1108-12A10-7M10.0 PRC03-12A10-7M10.5
Class of protection	IP40 or equivalent
Gear for rotation detector	S45C black coated TMNR-500NME ~ 3KNME: 60-tooth, module 1, tooth width 10 mm TMNR-5KNME: 120-tooth, module 1, tooth width 10 mm

Options
Rotation detector (MP-981), Rotation detector cable (MX-705)